![](/images/new-backgrounds/1196612/196612115x1.webp)
Unit 6: Troubleshooting
TEST LABEL PRINTING
The test label is designed to assist in the identification of print problems. Follow the flow chart provided below to perform this activity.
Refer to Figure
Choose Applicable Option
RS232C: (DSW = 1: OFF, 2: OFF, 3: OFF, 4: OFF) + FEED + POWER
Wireless LAN: (DSW = 1: OFF, 2: ON, 3: OFF, 4: OFF) + FEED + POWER
Bluetooth: (DSW = 1: OFF, 2: ON, 3: OFF, 4: OFF) + FEED + POWER
Infrared: (DSW = 1: ON, 2: OFF, 3: OFF, 4: OFF) + FEED + POWER
Flashes orange and enters the
Test Print Mode. Blinks green
while waiting.
FEED |
Test printing begins.
Flashes green.
FEED |
Pause printing.
Confirm printing has stopped and press
POWER.
Printer shuts down.
Figure 6-2, Test Print Mode
SATO MB2i Service Manual | PN 9001145B | Page |