SATO 200i manual Label Sensor Selection, Power = OFF

Unit 5: Printer Configuration

LABEL SENSOR SELECTION

This function allows for the determination of the sensor to be used to control label positioning relative to the media type that will be used. The two options are; eye-mark and gap. This selection can only be made through host interface using a RS232C cable.

POWER = OFF

Power off and

disconnect cable.

Printer shuts down.

Connect the printer to the host with RS232C cable.

Send printer operation registration command from the host and select the desired label type.

Print a label.

Adjustment successful?

Yes / No

Figure 5-2, Label Sensor Selection

SATO MB2i Service Manual PN 9001145B Page 5-5