SATO 200i manual Online Command Mode

Unit 5: Printer Configuration

ONLINE COMMAND MODE

This function allows the selection of receiving command by using either standard SATO Barcode Printer Language (SBPL) or first generation MB200 compatible commands. The MB200 compatible command option should only be chosen if first generation MB200’s will be used along with the newer generation. This will provide a common command language that will communicate to both.

Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.

Choose Applicable Option

MB200 Compatibility Mode: (DSW = 1: ON, 2: ON, 3: ON, 4: ON) + Cover Open + PRINT + POWER

SBPL Mode: (DSW = 1: ON, 2: ON, 3: ON, 4: ON) + Cover Open + FEED + POWER

Blinks green when setting

Online Command.

Flashes green when setting

completed.

Confirm setting is

complete.

Press POWER.

Printer shuts down.

Figure 5-6, Online Command Mode

SATO MB2i Service Manual PN 9001145B Page 5-11