Section
3
Parts Replacement
3-1 Preparing the Printer for Service
Caution!
Some of the components in the printer are extremely sensitive to static discharge damage. When servicing the printer, observe good static prevention practices.
•Place the printer on a grounded, conductive work surface.
•Ground yourself to the work surface through a 1 megohm series resistor, using a conductive wrist strap or other suitable device.
•Ground any tools that will contact the equipment (holding the conductive portion of the tools can provide a suitable ground).
•Keep replacement components in their protective packing until they are needed, and do not handle unnecessrily.
After repairs are completed:
After making the necessary repairs, reconnect the printer power supply and reinstall the print media. Confirm that the printer status LED glows green, and that the printer will feed a label when you press the FEED button.
33
SATO SERVICE MANUAL
CX Series Printers
Rev B
