PowerLogic™ PM5100 series user guide | Chapter |
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
•Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E in the USA or applicable local standards.
•Turn off all power supplying this device before working on it.
•Always use a properly rated voltage sensing device to confirm that all power is off.
•Do not exceed the device’s ratings for maximum limits.
•Always use grounded external CTs for current inputs.
Failure to follow these instructions will result in death or serious injury.
1.Turn off all power supplying this device before working on it.
2.Always use a properly rated voltage sensing device to confirm that all power is off.
Dimension
Figure 3–1: Dimension
96.00mm
|
| 78.5 mm |
|
| 12.8 mm | 72.00mm |
|
90 | .00° | mm | mm |
. | 90 | ||
00° |
| 90.6 | 107.4 |
|
| ||
96.00mm |
|
|
|
Meter mounting
This section describes how to mount the meter.
© 2014 Schneider Electric All Rights Reserved | 17 |