Chapter 13—MID Compliance
This section applies only to PM5111(referred to in the section as the meter) and contains descriptions and procedures that supplement the meter installation sheet. The information contained here supports the meter’s declaration of compliance with the Measuring Instruments Directive (2004/22/EC).
MID overview
Directive 2004/22/EC is the Measuring Instruments Directive (“MID”) from the European Parliament & Council that harmonises many aspects of legal metrology across the EU states.
Scope
Although MID applies to various measuring instruments, the scope of this section is limited only to the MID standards that apply to AC electricity metering equipment:
•EN
Electricity metering equipment (a.c.) — Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
•EN
Electricity metering equipment (a.c.) — Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)
Related topics
•Search the Internet for “Measuring Instruments Directive” or “Directive 2004/22/EC” for more information.
•The CE declaration document is available from the website. Search for ECDPM5000.
MID compliance for the meter
The meter complies to these MID standards and class indexes:
•EN
•EN
The meter achieves MID compliance through application of Annex B (Type
Examination) and Annex D (Declaration of Conformity to Type Based on Quality
Assurance of the Production Process).
Specifications relevant to MID
The meter meets all specifications listed in “Technical Specifications” on page 14. See that section for mechanical and electrical specifications such as IP rating, rated operating conditions, protective class and environmental conditions.
In addition, the following specifications, function limitations and specific conditions are relevant to MID:
Applicable MID standards and class index | • | EN | |
• | EN | ||
| |||
|
| ||
Type of measuring equipment | Static | ||
|
|
| |
© 2014 Schneider Electric All Rights Reserved | 85 |
