Schneider Electric PM5100 HMI settings, Setting up the display, Setting up regional settings

PowerLogic™ PM5100 series user guide Chapter 4—Front panel display and meter setup

HMI settings

Setting up the display

The HMI (human-machine interface) setup screens allow you to:

•control the general appearance and behavior of the display screens,

•change the regional settings, or

•change the meter passwords.

You can change the display screen’s contrast or the screen backlight and timeout settings.

Display setup menu tree

Maint	Reset	Meter
	Setup	Comm
		Alarm
		I/O	Displ
		HMI	Region
		Clock	Pass

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0000”), then press OK.

3.Navigate to HMI > Displ.

4.Move the cursor to point to the parameter you want to modify, then press Edit.

5.Modify the parameter as required, then press OK.

6.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

Display setup parameters

Parameter		Values	Description
Contrast	1	- 9	Increase or decrease the value to increase or
			decrease the display contrast.
			Set how long (in minutes) before the backlight
Backlight Timeout (min)	0	- 60	turns off after a period of inactivity. Setting this to
			“0” disables the backlight timeout feature (i.e.,
			backlight is always on).
			Set how long (in minutes) before the screen turns
Screen Timeout (min)	0	- 60	off after a period of inactivity. Setting this to “0”
			disables the screen timeout feature (i.e., display is
			always on).

7. Press to exit. Press Yes to save your changes.

Setting up regional settings

You can change the regional settings to localize the meter screens and display data in a different language, using local standards and conventions.

NOTE: In order to display a different language other than those listed in the Language setup parameter, you need to download the appropriate language file to the meter using the appropriate firmware upgrade tool such as DLF3000. See “Downloading Firmware” on page 82.

© 2014 Schneider Electric All Rights Reserved 35