Schneider Electric PM5100 manual Meter wiring, Serial No Description Specification

PowerLogic™ PM5100 series user guide Chapter 3—Hardware Reference

Meter wiring

For wiring instructions and safety precautions, see the meter installation sheet that was shipped with your meter, or download a copy at www.schneider-electric.com.

•Wire connections to the meter’s voltage inputs, control power, digital output, and RS- 485 communications are terminated using the supplied pluggable wire connectors.

•When wiring the meter’s current inputs, terminate the wire ends with ring or split-ring crimp connectors.

Use the meter installation sheet when wiring the meter.

UL: CAT III

20-347VLN/35-600VLL9/19//s

IEC: CAT III s+]9$



20-400VLN/35-690VLL9s:

_

+

				I	I	I	I	I	I
				1+	1-	2+	2-	3+	3-
			Modbus		$$120$
			RS-485	+ _
							0 V		Modbus
							D0 = Rx-, Tx-		RS-485
							D1 = Rx+, Tx+
Serial No.	Description		Specification
			• Wire size: 0.82 - 3.31 mm2 (18 - 12 AWG)
	Voltage Inputs (V1, V2, V3, VN)		• Wire strip length: 0.28 in (7 mm)
			• Torque: 0.5 - 0.6 N·m (4.4 - 5.3 in·lb)
			• Screw driver type: M3
			• Wire size: 0.82 - 3.31 mm2 (18 - 12 AWG)
	Control Power (L1, L2)		• Wire strip length: 0.28 in (7 mm)
			• Torque: 0.5 - 0.6 N·m (4.4 - 5.3 in·lb)
			• Screw driver type: M3
			• Wire size: 0.33 - 3.31 mm2 (22 - 12 AWG)
	Digital Output (D1+, -/C)		• Wire strip length: 0.24 in (6 mm)
			• Torque: 0.5 - 0.6 N·m (4.4 - 5.3 in·lb)
			• Screw driver type: M2
			• Wire size: 0.82 - 3.31 mm2 (18 - 12 AWG)
	Current Inputs		• Wire strip length:0.28 in (7 mm)
	(I1+, I1-, I2+, I2-, I3+, I3-)		• Torque: 0.9 - 1.0 N·m (8.0 - 9.0 in·lb)
			• Screw driver type: PH1
			• Wire size: 0.33 - 3.31 mm2 (22 - 12 AWG)
	Modbus RS-485 (+,-,	, C)	• Wire strip length: 0.24 in (6 mm)
			• Torque: 0.5 - 0.6 N·m (4.4 - 5.3 in·lb)
			• Screw driver type: M3

© 2014 Schneider Electric All Rights Reserved 19