Schneider Electric PM5100 manual Setting up the screen passwords, Regional settings menu tree

Chapter 4—Front panel display and meter setup PowerLogic™ PM5100 series user guide

Regional settings menu tree

Maint	Reset	Meter
	Setup	Comm
		Alarm
		I/O	Displ
		HMI	Region
		Clock	Pass

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0000”), then press OK.

3.Navigate to HMI > Region.

4.Move the cursor to point to the parameter you want to modify, then click Edit.

5.Modify the parameter as required, then press OK.

6.Move the cursor to point to the next parameter you want to modify, press Edit, make your changes, then press OK.

Regional settings setup parameters

Parameter	Values	Description
Language	English US, French, Spanish, German,	Select the language you want the meter to
	Italian, Portuguese, Chinese, Russian	display.
Date Format	MM/DD/YY, YY/MM/DD, DD/MM/YY	Set how you want the date to be displayed,
		e.g., month/day/year.
Time Format	24Hr, AM/PM	Set how you want the time to be displayed,
		e.g., 17:00:00 or 5:00:00 PM.
HMI Mode	IEC, IEEE	Select the standards convention used to
		display menu names or meter data.

7. Press to exit. Press Yes to save your changes.

Setting up the screen passwords

This can only be configured through the front panel. The factory-default setting for all passwords is “0000”. Changing the default password for screens that are password- protected prevents unauthorized personnel from accessing certain screens such as the diagnostics and reset screens.

NOTICE

LOST DATA

Record your meter's screen password information in a secure location.

Failure to follow these instructions can result in data loss.

If you lose your password, you must return the meter for factory reconfiguration, which resets your device to its factory defaults and destroys all logged data.

36 © 2014 Schneider Electric All Rights Reserved