Using the HiPath 1100 Features
System signaling tones
During feature configuration the system uses the following signaling tones:
Tone | Meaning |
|
|
Internal dialing tone | The system is ready to receive and send call information. |
|
|
Signaling tone | Connection established. Ring signal is being applied to |
| phone number. |
|
|
Dial tone | Network accepted information request and is sending a re- |
| quest for more information. |
|
|
Busy signal | It indicates to the caller that the number is busy. |
| It is also used when the destination cannot be accessed |
| (e.g., invalid number). |
|
|
External false signal | The dial tone that is heard is not from the carrier |
|
|
Call Waiting Signaling Tone | It indicates to the user having a conversation that there is |
| another call ringing. |
|
|
Call Waiting tone for Door | It indicates to the user having a conversation that someone |
Opener | is requesting the Door Opener to open the door. |
|
|
Confirmation tone | The procedure was successfully completed and accepted. |
|
|
Rejection tone | The procedure is invalid and was not accepted. |
|
|
Override tone | It alerts the user having a conversation that the call’s priva- |
| cy was violated (override). |
|
|
Conference tone | It indicates that a new participant joined the conversation. |
|
|
Recall confirmation tone | It confirms a callback. |
|
|
Alert signal | It alerts the called party when the Speakerphone |
| swering and Paging features are enabled. |
|
|
Special Dial Tone | Indicates that a service is activated (Night Service, Elec- |
| tronic Lock, Do Not Disturb, etc.) |
|
|
After a Direct Communication Call is established. | |
|
|
17