Functions used for making calls
Step by step |
|
|
|
|
|
>HF ANSWERBACK ON ? |
|
| : | ||
|
|
|
|
| or |
>HF ANSWERBACK OFF ? |
|
| : | ||
|
|
|
|
| or |
* 9 | 6 | or | # | 9 | 6 |
|
|
|
|
| or |
Speaker |
|
|
|
|
|
38 |
|
|
|
|
|
Speakerphone Auto-Answering Mode1
The called extension receives an Alert tone. The call us- ing the speakerphone is established immediately after this tone is received.
Required: A System Telephone with a Speakerphone at the destination number.
Select and press to confirm.
Enter the code to activate or deactivate answering.
LCR2
The LCR (Least Cost Routing) is designed to lower tele- phone communications costs. When LCR is enabled, all outgoing calls are routed to provide the least expensive connection costs. A table is created listing all times of the day, days of the week, telephone service providers so that calls can be made when rates are at their low- est. After programming, you can make calls with no need to enter the carrier code since LCR automatically uses the carrier that provides the lowest rate at the time the call is being placed.
Required: This feature must be configured for the sys- tem by using the HiPath 1100 Manager.
Lift the handset.
Press this key. The LED turns on.
Enter the code for accessing an external line (e.g., 0). Wait for an external line dial tone.
Enter the external number you want to call.
Wait for the call to be answered. Initiate conversation.
[1]This feature must be enabled by the destination number during programming (see Programming an Extension -
[2]Settings must be configured on the HiPath 1100 Manager.
