Functions used for making calls
Step by step |
|
RECALL? | : |
| or |
* 5 | 8 |
| or |
Wait 7 seconds | |
| or |
Speaker |
|
RECALL ENABLED? |
|
| or |
Speaker |
|
<< >> | |
RECALL: ......? |
|
| or |
Speaker |
|
Recall due to No Answer/Busy
Press to confirm.
Enter the code for confirming the recall.
Wait 7 seconds until you hear a distintive tone (if config- ured, Recall will be automatically activated).
Wait for a confirmation tone.
Replace the handset.
Press this key. The LED turns off.
Wait for the recall.
If the configuration for activating Recall has been changed1:
Wait a few seconds until the display shows "RECALL ON" and the busy signal or the call is briefly interrupted.
Replace the handset.
Press this key. The LED turns off.
Wait for the recall.
Answering a Recall
Required: Recall is active.
The telephone rings (a distinctive ring).
The display shows "RECALL:......" and the number you
want to call. Lift the handset.
Press this key. The LED turns on.
Wait for the call to be answered. Initiate conversation.
[1](See Activating Recall/Urgent Call with Timeout, in the Program- ming Manual)
33
