SnapGear 2.0.1 Local Internal Address Place on Ethernet Bridge, Virtual Private Networking

Create the GRE tunnel. Select GRE Tunnels from the left hand menu. For the Slough end enter the IP addresses below. Leave Local Internal Address blank, and check Place on Ethernet Bridge.

	Figure 9-29
GRE Tunnel Name:	to_bris
Remote External Address:	10.254.0.2
Local External Address:	10.254.0.1
Local Internal Address:
Place on Ethernet Bridge:	Checked

For the Brisbane end enter the IP addresses below. Leave Local Internal Address blank, and check Place on Ethernet Bridge.

GRE Tunnel Name:	to_slough
Remote External Address:	10.254.0.1
Local External Address:	10.254.0.2
Local Internal Address:
Place on Ethernet Bridge:	Checked

Reboot the unit if prompted to do so.

155

Virtual Private Networking