Chapter 4 Administering the Sun Crypto Accelerator 4000 Board With the vcaadm andvcadiag Utilities 77
Displaying Board Status
Toget the current status of a Sun Crypto Accelerator 4000 board, issue the show
statuscommand. This displays the hardware and firmware versions for that board,
the MAC address of the network interface, the status (Up versus Down, speed,
duplex, and so on.) of the network interface, and the keystore name and ID.

Determining if the Board is Operating in FIPS 140-2 Mode

If theSun Crypto Accelerator 4000 board is operating in FIPS 140-2 mode, the show
status command will print the following line:
Ifthe board is not operating in FIPS 140-2 mode, the show statuscommand will not
print a line specifying FIPS 140-2 mode.
Youcan also use the kstat(1M) utility to determine if the board is operating in FIPS
140-2mode. The kstat(1M) parameter, vs-mode, returns a value of FIPS if the board
isoperating in FIPS 140-2 mode. Refer to “Sun Crypto Accelerator 4000 Cryptographic
and Ethernet Driver Operating Statistics” on page43 and the online manual page and
for kstat(1M).
vcaadm{vcaN@hostname,sec_officer}> show status
Board Status
----------------------------------------------------------------
Hardware Version: 1.0
Firmware Version: 1.0
Bootstrap Firmware Version: VCA Crypto Accelerator 1.0 March 2003
Current Firmware Version: VCA Crypto Accelerator 1.0 March 2003
MAC Address: 00:03:ba:0e:96:aa
Interface information: Link up, 1000Mbps, Full Duplex
Keystore Name: keystore_name
Keystore ID: 832aece03e654790
Login Session Timeout (in minutes): 10
Password policy security level: HIGH
Number of master key backups: 0
* Device is in FIPS 140-2 Mode
----------------------------------------------------------------
* Device is in FIPS 140-2 Mode