Sun Microsystems 4000 Sun Crypto Accelerator 4000 Cryptographic and Ethernet Driver Operating Statistics

Chapter 3 Configuring Driver Parameters 43
Toestablish a forced mode for a speed of 10 Mbps and an autonegotiation mode for
duplex, type the following at the OBP prompt:
Youcould also type the following at the OBP prompt to establish the same local link
parameters as the previous example:
Refer to the IEEE 802.3 documentation for further details.
Sun Crypto Accelerator 4000
Cryptographic and Ethernet Driver
Operating Statistics
This section describes the statistics presented by the kstat(1M) command.
Cryptographic Driver Statistics
TABLE3-12 describes the cryptographic driver statistics.
ok boot net:speed=10,duplex=auto
ok boot net:speed=10
TABLE3-12 Cryptographic Driver Statistics
Parameter Description Stableor Unstable
vs-mode Thevalues are FIPS,standard,orunitialized.
FIPS indicates that the boardis in FIPS mode.
standard indicates that the boardis in not in
FIPSmode. unitialized indicates that the board
is not initialized.
Stable
vs-status The values areready,faulted,orfailsafe.
ready indicates that the boardis operating
normally.faulted indicates that the board not
operating. failsafe indicates failsafe mode
which is the original factory state of the board.
Stable