13
CHAPTER 2
Installing the Sun CryptoAccelerator 4000 Board
This chapter describes how to install the Sun Crypto Accelerator 4000 hardware and
software. This chapter includes the following sections:
■“Handling the Board” on page13
■“Installing the Board” on page14
■“Installing the Sun Crypto Accelerator 4000 Software” on page16
■“Directories and Files” on page19
■“Removing the Software” on page21

Handling the Board

Each board is packed in a special antistatic bag to protect it during shipping and
storage. Toavoid damaging the static-sensitive components on the board, reduce
any static electricity on your body before touching the board by using one of the
following methods:
■Touchthe metal frame of the computer.
■Attach an antistatic wrist strap to your wrist and to a grounded metal surface.
Caution – Toavoid damaging the sensitive components on the board, wear an
antistatic wrist strap when handling the board, hold the boardby its edges only, and
always place the board on an antistatic surface (such as the plastic bag it came in).