132 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
Troubleshooting the Sun CryptoAccelerator 4000 Board
This section describes the commands available at the OBP level for troubleshooting
the board. Refer to the OpenBoot Command Reference Manual for moreinformation on
the commands described in the following subsections.

show-devs

Todetermine whether the Sun Crypto Accelerator 4000 device is listed in the system:
fromthe OBP prompt, type show-devs to display the list of devices. You should see
lines in the list of devices, similar to the examples below,specific to the Sun Crypto
Accelerator 4000 board:
In the preceding example, the /pci@8,600000/network@1 entry identifies the
device path to the Sun Crypto Accelerator 4000 board. There will be one such line
for each board in the system.
ok show-devs
.
.
/chosen
/packages
/upa@8,480000/SUNW,ffb@0,0
/pci@8,600000/network@1
/pci@8,600000/SUNW,qlc@4
/pci@8,600000/SUNW,qlc@4/fp@0,0
.
.