Chapter 7 Diagnostics and Troubleshooting 125
5. Clear check boxes in the Network group that are not named vca
N
(netlbtest).
Note that Nspecifiesthe placement of the instance number of the device under
test.
■If a vcaN(netlbtest) is displayed, then go to Step 6.
■If a vcaN(netlbtest) is not displayed, probe the system to find it by selecting
Reprobe system in the Commands drop-down menu.
Refer to the SunVTS user’s guide for the exact procedure. When the probe completes
and a vcaN(netlbtest) is displayed, continue to Step 6.
6. Select the Intervention Mode button. Select one of the instances of
vcaN(netlbtest), then right-click and drag to display the TestParameter
Options dialog box.
These options, which only pertain to netlbtest, are described in the SunVTS test
reference manual.
7. After you have made all selections, select Apply from the Within Instance drop-
downmenu to change the selected instance of vcaN(netlbtest), or select Apply
from the Across All Instances drop-down menu to change all checked instances of
vcaN(netlbtest).
This action removes the dialog box and returns you to the SunVTS Diagnostic main
window.
8. Select one of the instances of vcaN(netlbtest) then right-click and drag to
display the TestExecution Options dialog box.
An alternate method of displaying the TestExecution Options dialog box is to select
the Options drop-down main menu; then select TestExecutions. These options are
generic SunVTS controls that affect all tests. Refer to the SunVTS user’s guide for
detailed information.
9. When you have made all selections, select Apply to remove the dialog box the
return to the SunVTS Diagnostic main window.
10. Select Start to perform the selected tests.
11. Select Stop to stop all tests.
▼To Perform nettest
1. As superuser, start SunVTS.
# /opt/SUNWvts/bin/sunvts