Chapter 5 Configuring Sun ONE Server Software for Use With the Sun Crypto Accelerator 4000 Board 89
Configuring Sun ONE WebServers
This section describes the following:
■“Passwords” on page 89
■“Populating a Keystore” on page90
■“Overview for Enabling Sun ONE WebServers” on page 91
■“Installing and Configuring Sun ONE WebServer 4.1” on page 92
■“Configuring Sun ONE WebServer 4.1 for SSL” on page 99
■“Installing and Configuring Sun ONE WebServer 6.0” on page 101
■“Configuring Sun ONE WebServer 6.0 for SSL” on page 108

Passwords

Youare asked for several passwords in the course of enabling a Sun ONE Web
Server.TABLE 5-1 provides a description of each. These passwords are referredto
throughoutthis chapter. If there is any confusion about which password to use, refer
to TABLE5-1.
TABLE5-1 Passwords Required for Sun ONE Web Servers
Typeof Password Description
SunONE Web Server
Administration
Server
Requiredto start up the Sun ONE Web Server Administration
Server.This password was assigned during the Sun ONE Web
Server setup.
WebServer Trust
Database Requiredto start the internal cryptographic module when running
in securemode. This password was assigned when creating a trust
database throughthe Sun ONE Web Server Administration Server.
This passwordis also required when requesting and installing
certificatesinto the internal cryptographic module.
Security Officer Requiredwhen performing vcaadm privileged operations.
username:password Requiredto start the Sun Crypto Accelerator 4000 module when
running in securemode. This password is also required when
requestingand installing certificates into the internal cryptographic
module(keystore_name). This password consists of the username and
password of a keystoreuser that was created in vcaadm. The
keystoreusername and password are separated by a colon (:).