118 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
5. Copy your certificate request with the headers from
/etc/apache/keys/base_name-certreq.pem (where base_name was set in Step9
of “ToEnable the Apache Web Server” on page 112) and hand it off to your
certificateauthority.
6. Once the certificate is generated, create the certificate file
/etc/apache/keys/base_name-cert.pem and paste your certificateinto it.
7. Start the Apache Web Server.
This assumes your Apache binary directoryis /usr/apache/bin. If this is not your
binary directory,type in the correct directory.
8. Enter your PEM pass phrase when prompted for it.
9. Verify the new SSL-enabled web server with a browser by going to the following
URL:
https://server_name:server_port/
Note that the default server_port is 443.
#/usr/apache/bin/apachectl start