130 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
3. Reset the system.
4. Type show-nets to display the list of devices and enter a selection:
Youshould see a list of devices, similar to the example below, specific to the adapter:
Note – Toperform the following self-test with the test command, the Ethernet
port must be connected to a network.
5. Perform the self-test using the test command:
The following tests are performed when the test command is executed:
■vca register test (happens only when diag-switch? is true)
■Internal loopback test
■link up/down test
ok reset-all
ok show-nets
a) /pci@8,600000/network@1
b) /pci@8,700000/network@5,1
q) NO SELECTION
Enter Selection, q to quit: a
/pci@8,600000/network@1 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y for creating devalias mydev for
/pci@8,600000/network@1