100 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
4. Set encryption to On.
The Port field in the dialog box should update to the default SSL port number 443.
Alter the port number if necessary.
5. Select the OK button.
6. Apply these changes by selecting the Save button.
The web server is now configured to run in securemode.
7. Edit the /usr/netscape/server4/https-hostname/config/magnus.conf file
(hostname is the name of the web server) by adding the following line:
By default, the certificate you generated is named Server-Cert. If your certificate
has a different name, be sure to use the name you chose instead of Server-Cert.
8. Select the server you want to administer and select the Apply button in the far
upper right corner of the page.
This selection applies the changes through the Sun ONE WebServer 4.1
Administration Server.
9. Select the Load Configuration Files button to apply the changes you just made to
the magnus.conf file.
Youare redirected to a page that enables you to start your web server instance.
If you select the Apply Changes button when the server is off, an authentication
dialog box promptsyou for the username:password .This window is not resizable, and
you might have a problem submitting the change.
There are two workarounds for this problem:
■Select the Load Configuration Files instead.
■Start up the web server first, and select the Apply Changes button.
10. In the Sun ONE Web Server 4.1 Administration Server window, select the On/Off
link on the left side of the window.
11. Enter the passwords for the servers and select the OK button.
Youare prompted for one or more passwords. At the Module Internal prompt,
provide the password for the web server trust database.
At the Module keystore_name prompt, enter the username:password for that keystore.
Enter the username:password for other keystores as prompted.
12. Verify the new SSL-enabled web server at the following URL:
https://hostname.domain:server_port/
CERTDefaultNickname keystore_name:Server-Cert