40 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003

▼To Set Parameters for All Sun Crypto Accelerator 4000 vca

Devices With the vca.conf File
1. Add a line in the vca.conf file to change the value of a parameter for all
instances by entering parameter=value;.
The following example sets the adv-autoneg-cap parameter to 1for all instances
of all Sun Crypto Accelerator 4000 Ethernet devices:
Example vca.conf File
The following is an example vca.conf file:
adv-autoneg-cap=1;
#
# Copyright 2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#ident "@(#)vca.conf 1.2 02/06/26 SMI"
#
# Use the new Solaris 9 properties to ensure that the driver is attached
# on boot, to get us to register with KCL2. This also prevents us from
# being unloaded by the cleanup modunload -i 0.
#
ddi-forceattach=1 ddi-no-autodetach=1;
name="pci108e,3de8" parent="/pci@8,700000" unit-address="1" adv-autoneg-cap=0;
adv-autoneg-cap=1;