68 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003

▼To Initialize the Sun Crypto Accelerator 4000

Board to Use an Existing Keystore
1. Enter vcaadm at a command prompt of the system with the Sun Crypto
Accelerator 4000 board installed or enter vcaadm -h hostname if the system is
remote, and select 2to restore the board from a backup:
2. Enter the path and password to the backup file:
3. Verify the configuration information:
#vcaadm -h hostname
This board is uninitialized.
You will now initialize the board. You may
either completely initialize the board and
start with a new keystore or restore the board
using a backup file.
1. Initialize the board with a new keystore
2. Initialize the board to use an existing keystore
Your Choice (0 to exit) --> 2
Enter the path to the backup file: /tmp/board-backup
Password for restore file:
Board restore parameters:
-----------------------------------------------------
Path to backup file: /tmp/board-backup
Keystore name: keystore_name
-----------------------------------------------------
Is this correct? (Y/Yes/N/No) [No]: y
Restoring data to crypto accelerator board...