122 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
Note – Physical mode is supported; however,this procedure assumes you are using
Logical mode.
3. Disable all tests by clearing their check boxes.
4. Select the check box for Cryptography, then select the plus box for Cryptography
to display all tests in the Cryptography group.
5. Clear check boxes in the Cryptography group that are not named vcatest.
■If a vcatest is displayed, then go to Step 6.
■If a vcatest is not displayed, probe the system to find it by selecting Reprobe
system in the Commands drop-down menu.
Refer to the SunVTS user’s guide for the exact procedure. When the probe completes
and a vcatest is displayed, continue to Step 6.
6. Select one of the instances of vcatest then right-click and drag to display the
TestParameter Options dialog box.
These options, which only pertain to the vcatest, are described in “TestParameter
Options for vcatest” on page 123.
7. After you have made all selections, select Apply from the Within Instance drop-
down menu to change the selected instance of vcatest, or select Apply from the
Across All Instances drop-down menu to change all checked instances of
vcatest.
This action removes the dialog box and returns you to the SunVTS Diagnostic main
window.
8. Select one of the instances of vcatest then right-click and drag to display the
TestExecution Options dialog box.
An alternate method of displaying TestExecution Options dialog box is to select the
Options drop-down main menu; then select TestExecutions. These options are
generic SunVTS controls that affect all tests. Refer to the SunVTS user’s guide for
detailed information.
9. When you have made all selections, select Apply to remove the dialog box and
return to the SunVTS Diagnostic main window.
10. Select Start to perform the selected tests.
11. Select Stop to stop all tests.