Texas Instruments manual Table B-22. MSP-TS430PZ100 Bill of Materials, MSP430FG4619IPZ

MSP-TS430PZ100www.ti.com

Table B-22. MSP-TS430PZ100 Bill of Materials

Pos.	Ref Des	No. per	Description	DigiKey Part No.	Comment
		Board
1	C1, C2,	0	12pF, SMD0805		DNP
					DNP: Only
1b	C3, C4	0	47pF, SMD0805		recommendation. Check
					your crystal spec.
2	C6, C7	1	10uF/10V, Tantal Size B	511-1463-2-ND	DNP: C6
3	C5	1	100nF, SMD0805	478-3351-2-ND
4	C8	1	10nF, SMD0805	478-1383-2-ND
5	C9	1	470nF, SMD0805	478-1403-2-ND
6	D1	1	yellow LED, TH, 3mm, T1	511-1251-ND
					DNP: Headers and
	J1, J2, J3,			SAM1029-25-NDSAM1213-	receptacles enclosed with
7		0	25-pin header, TH		kit.Keep vias free of
	J4			25-ND	solder.: Header:
					Receptacle
8	J5	1	3-pin header, male, TH	SAM1035-03-ND
9	J6, J7	2	2-pin header, male, TH	SAM1035-02-ND	place jumper on header
10		2	Jumper	15-38-1024-ND	Place on: J6, J7
11	JTAG	1	14-pin connector, male, TH	HRP14H-ND
12	BOOTST	0	10-pin connector, male, TH		DNP: Keep vias free of
					solder
				Q1: Micro Crystal	DNP: Keep vias free of
13	Q1, Q2	0	Crystal	MS1V-T1K 32.768kHz,
					solder
				C(Load) = 12.5pF
14	R3	1	330 Ω, SMD0805	541-330ATR-ND
	R1, R2, R4,		0 Ω, SMD0805
15	R8, R9, R10,	3		541-000ATR-ND	DNP: R4, R9, R10, R12
	R11, R12
16	R5	1	47k Ω, SMD0805	541-47000ATR-ND
17	U1	1	"Socket: IC201-1004-008or		Manuf.: Yamaichi
			IC357-1004-53N"
18	PCB	1	82 x 90 mm		2 layers
19	Adhesive	4	~6mm width, 2mm height	e.g., 3M Bumpons Part No.	Apply to corners at bottom
	Plastic feet			SJ-5302	side
20	MSP430	2	MSP430FG4619IPZ		DNP: enclosed with kit
					supplied by TI

98	Hardware	SLAU278F –May 2009 –Revised December 2010
		Submit Documentation Feedback

© 2009–2010, Texas Instruments Incorporated