Texas Instruments MSP430 1.11 Kit Contents, FET430Fx137RF900, 1.12 Kit Contents, MSP-TS430xx

www.ti.com

Kit Contents, FET430Fx137RF900

1.11 Kit Contents, FET430Fx137RF900

• One READ ME FIRST document

• One legal notice

• One MSP430 CD-ROM

• One MSP-FET430UIF interface module

• Two target socket module

MSP-FET430F5137RF900: Two EM430F5137RF900 target socket modules. This is the PCB on which

is soldered a CC430F5137 device in a 48-pin RGZ package. A 2×7-pin male connector is also present

on the PCB

MSP-FET430F6137RF900: Two EM430F6137RF900 target socket modules. This is the PCB on which

is soldered a CC430F6137 device in a 64-pin RGC package. A 2×7-pin male connector is also present

on the PCB

• Two CC430EM battery packs

• Four AAA batteries

• Two 868-/915-MHz antennas

• Two 32.768-kHz crystals

• 18 PCB 2x4-pin headers

• One USB cable

• One 14-Pin JTAG conductor cable

1.12 Kit Contents, MSP-TS430xx

'PW14, 'L092, 'PW24, 'DW28, 'PW28, 'PW28A, 'DA38, 'QFN32x0, 'RSB40, 'DL48, 'RGZ48B, 'PM64,

'PM64A, 'RGC64B, 'RGC64USB, 'PN80, 'PN80A, 'PN80USB, 'PZ100, 'PZ100A, 'PZ100B, 'PZ5x100,

'PZ100USB

• One READ ME FIRST document

• One MSP430 CD-ROM

• One 32.768-kHz crystal from Micro Crystal (except MSP-TS430PW24)

• One target socket module

• A 2×7-pin male JTAG connector is also present on the PCB (see different setup for L092)

• One small box containing two MSP430 device samples (See table for Sample Type)

SLAU278F–May 2009 –Revised December 2010 GetStarted Now!