CHAPTER 2
2.2.6 Loading Card Input Hopper
Figure 2-15 shows the Card Input Hopper actions necessary to replenish cards.
Step 1. Press down on Release Tab, and rotate Hopper to open position.
Step 2. Place cards in Hopper with printed side facing right (facing up with hopper closed). Cards with Magnetic strips normally get installed with down-facing stripes, but some Encoder installations support up-facing stripes for printing on side with stripe. Encoder Errors occur when cards are loaded with their magnetic stripes facing away from the read-write heads.
Step 3. Return Hopper to closed position.
Figure 2-15. Card Cartridge Loading.
