The Eltron Company P310 manual Smart Card Docking Station

CHAPTER 5

For Smart Card Contact Station removal, refer to Figure 5-21, and proceed as follows:

Step 1. Remove the Rear Case (see Section 5.2.1).

Step 2. Remove both the screw holding the Smart Card Station and the cable braid.

Step 3. Unplug the Smart Card Station from the Smart Card Interface Board, and while feeding the cable, slide the Smart Card Station to the right until free. After installing a new Smart Card Station, check operation using the Smart Card Test in the Test Software (see Appendix A).

Figure 5-21. Smart Card Docking Station

980264-001 Rev. B 5-23