CHAPTER 2
2.2.5 Card Gate Adjustment
Figure 2-14 shows the Card Gate Adjustment Lever with arrows that show the directions of travel.
Step 1. Set the Card Gate Thickness Lever to match the thickness of the cards. Note that lever positions closer to the back of the printer open the Card Feed Gate for thicker cards.
Step 2. If during operation cards either fail to feed or multiple card feeds occur, check the setting of the Card Gate Adjustment Lever. Increase the opening if cards fail to feed, and decrease the opening if too many cards feed at the same time. Also, avoid using warped cards. Warped cards can require Card Gate openings greater than the one indicated for the card size loaded.
Figure 2-14. Card Gate Adjustment
