New Check Prompts

Chapter 3 - Guest Check Functions

 

 

3.2.6Override Meal Period

Meal Periods are set up by time for each day of the week in the Meal Period Setup table. The current setting can be overridden for the current check only or for all checks until the System Z report is done. The change can affect one terminal or all terminals.

For One Check Only

1.Press a [MEAL PERIOD #] key which has been set for the Meal Period wanted for this check.

The override setting reverts back to the preset Meal Period after the check is sent.

For All Checks Today

1.Press [STAY DOWN].

2.Press the [MEAL PERIOD #] key wanted.

3.Screen prompts:

Broadcast changes?

4.Press YES for the change to be effective at all stations in the system. Press NO for the change to affect this station only.

The override setting will be effective until the Meal Period is changed again, or until the next System Z report is done or the power is cycled.

3-8

FS-3700 R4 Owner’s Manual

Page 48
Image 48
Toshiba OM-3700 Override Meal Period, For One Check Only, For All Checks Today, Press Stay Down, Broadcast changes?