Entering Menu Items

Chapter 3 - Guest Check Functions

 

 

3.3.6Enter Modifiers with Forced Display

A modifier can only be entered on a check following a Menu Item. The number of items that may be entered from a modifier screen is set in Menu Item Setup.

Procedure

1.Press the [MENU ITEM] key for the item wanted.

It is added to the check.

2.A list of modifiers displays. Press a key to choose a modifier. The modifier screen will clear according to its setting in the Menu Item’s programming.

If this Forced Display allows one selection, the screen will clear after one choice is made.

If this Forced Display allows more than one selection, the screen will clear after that number of choices is made.

If there is no limit to the number of selections from the Forced Display, a [TOTAL] key should be on the screen to indicate all wanted choices have been made.

3.When all choices are made from the Forced Display(s), the screen returns to the one from which the Menu Item was entered.

3.3.7Enter Modifiers with Special Instructions

If a Menu Item’s Department has the USAGE field set to Special Instructions, the item can be used as a modifier but preset on the screen rather than be included on a Forced Display.

Procedure

1.Enter the primary [MENU ITEM].

2.Press the preset special instruction [MENU ITEM].

Special Instruction items cannot be entered on a check before a primary Menu Item is entered.

3-12

FS-3700 R4 Owner’s Manual

Page 52
Image 52
Toshiba OM-3700, FS-3700 R4 Series Enter Modifiers with Forced Display, Enter Modifiers with Special Instructions