Chapter 3 - Guest Check Functions New Check Prompts
FS-3700 R4 Owner’s Manual 3-5
Index the table # and press ENTER on the keypad.
3.2.2 Guest Count
A guest count can be required for the Order Type by the REQ GUEST CNT flag
Order Type Setup. The Order Type is determined by the Job Code of the
Employee logged in.
This setting requires a guest count entry before the check is sent.
An additional setting, PROMPT # GUEST in Order Type Setup, can require
a guest count entry before a menu item is entered.
The Order Type can be set to enter a default number of guest with Order Type
Setup\Options2 DEFAULT GUESTS flag set, so the server does not have to
make an entry.
The [GUEST COUNT] key does not apply if the Terminal Setup\Main option
CUST CNT METHOD is set for tracking by Meal Count rather than Guest Count.
Order Type set to require and prompt for number of guest
1. Start the check.
Screen prompts for guest count.
2. Index the number of guest and press ENTER on the keypad.
Order Type set to require number of guest
With [GUEST]
1. Start the check.
2. Index the number of guest and press [GUEST]
OR
1. Press [GUEST]
Screen prompts for guest count.
2. Index the number of guest and press ENTER on the keypad.
Without [GUEST]
1. Enter items.
2. Press [PRINT] or [TOTAL] to send the check.
3. Screen prompts for the guest count.