Chapter 2 - Access the System Clocking In/Out
FS-3700 R4 Owner’s Manual 2-5
2. Press [CLOCK OUT].
If prompted, index amount of cash tips, press ENTER.
If prompted NOT ENOUGH TIPS, index manager I.D. # and press ENTER.
3. The receipt printer prints a clock out report with the employee’s name, Job
Code, time/date and the total hours worked both for this shift and this week.
2.2.3 Break Out
Notes
[BREAK OUT] records an unpaid break for the employee.
It does not prompt for tips or require that checks be closed.
The minimum time before the employee may clock back in can be set in System
Setup\Labor, #2 Minimum Break Time. If an employee attempts to clock in before
the set time a manager approval may be required.
Procedure
1. Index employee I.D. #.
2. Press [BREAK OUT].
3. When the break is over, index the employee I.D. # and then press
[CLOCK IN].
2.2.4 Schedule Enforcement
Notes:
Schedule enforcement will prompt an employee clocking in or out if they are too
early or too late.
Requires a manager override to clock in or out in this condition.
Clock in and out times are set in this week’s labor schedule.
Refer to the FS-3700 R4 Labor Schedule Owner’s Guide for more detailed
information.