User’s Manual 8-9
Optional Devices

Memory card care

1. Do not write to a memory card if the battery power is low. Low power
could affect writing accuracy.
2. Do not remove a memory card while read/write is in progress.
3. The memory card is designed so that it can be inserted only one way.
Do not try to force the card into the slot.
4. Do not leave a memory card partially inserted in the slot. Press the
memory card until you hear it click into place.
5. Do not twist or bend memory cards.
6. Do not expose memory cards to liquids or store in humid areas or lay
media close to containers of liquid.
7. After using a memory card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.
Memory expansion
You can install additional memory in the computer's Memory Module Slot to
increase the amount of RAM. This section describes how to install and
remove a memory module.
Set the write-protect switch to the lock position, if you do not want to record
data.
■
Before you install or remove a memory module, turn off the computer
with the Shut Down o ption in the Windo ws Start menu. If y ou install or
remove a memory module while the computer is in Standby or
Hibernation mode, data will be lost.
■
Some memory modules can be physically installed but are not
compatible with the computer. In this case the computer will issue a
warning.
Satellite P100 / Satellite Pro P100 Series: There will be a long beep,
3 short beeps, 3 more short beeps and then a long beep when you turn
the power on. In this case, shut down the power and remove the
incompatible memory module.
CAUTION: If you want to upgrade system memory, you should only
use certified modules. Ask your vendor or check the TOSHIBA web site
for a list of approved memory products.