
Troubleshooting
Sound system
Problem | Procedure |
No sound is heard | Adjust the volume control dial. |
| Check the software volume settings. |
| Make sure the headphone connection is |
| secure.Check Windows Device Manager. Make |
| sure the sound function is enabled and that |
| settings for I/O address, Interrupt level and DMA |
| are correct for your software and do not conflict |
| with other hardware devices that you have |
| connected to the computer. |
| If problems persist, contact your dealer. |
|
|
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.
TouchPad
Problem | Procedure | |
The system might be busy. If the pointer is | ||
not respond to | shaped as an hourglass, wait for it to resume its | |
TouchPad operation | normal shape and try again to move it. You may | |
| also press Fn + F9 to enable the TouchPad and | |
| then try again to move it. | |
Try changing the | ||
not work | the mouse control utility. | |
| 1. | Open the Control Panel, select the Printers |
|
| and Other Hardware icon and press Enter. |
| 2. | Select the Mouse icon and press Enter. |
| 3. | Click the Buttons tab. |
| 4. | Set the |
|
| click OK. |
The mouse pointer | Try changing the speed setting in the mouse | |
moves too fast or too | control utility. | |
slow | 1. | Open the Control Panel, select the Printers |
|
| and Other Hardware icon and press Enter. |
| 2. | Select the Mouse icon and press Enter. |
| 3. | Click the Pointer Options tab. |
| 4. | Set the speed as instructed and click OK. |
| If problems persist, contact your dealer. | |
|
|
|
User’s Manual |