
Operating Basics
Fingerprint System Boot Authentication
General
The fingerprint authentication system can be used to replace the keyboard- based User/BIOS Password authentication system when booting up.
If you do not want to use the fingerprint authentication system for password authentication when booting up, but prefer to use the
■It is necessary to register the User Password before using the Fingerprint
■When swiping, please do it slowly and at a constant speed. If this does not improve the authentication rate, please adjust the speed.
■If there are any changes in the environment or settings related to authorization, you will be required to provide authorization information such as a username and HDD password.
How to Enable Fingerprint Power-on Security Settings
It is necessary to first enroll your fingerprint with the Protector Suite QL application prior to enabling and configuring the Fingerprint
Check that your fingerprint is enrolled before configuring the settings. See Manual for Fingerprint Registration/Enrollment instructions.
1.Swipe your finger across the Fingerprint Sensor.
2.MENU appears in the lower right corner of the screen. Swipe your finger overtop of the Fingerprint Sensor, and select Control Center from the MENU items.
3.The Protector Suite QL Settings screen is displayed to select Setting
4.
Replace the
The modified configuration for Fingerprint
User’s Manual |