
Troubleshooting
If you turn the computer off in Standby mode while the display is on TV, the computer will select either the internal LCD or an external computer CRT as the display device.
Standby/Hibernation
Problem
The system will not enter Standby/ Hibernation
Procedure
Is Windows® Media Player open? The system might not enter Standby/Hibernation, if
Windows® Media Player is either playing a selection or finished playing a selection. Close
Windows® Media Player before you select Standby/Hibernation.
If problems persist, contact your dealer.
Real Time Clock
ProblemProcedure
The following message is Displayed on the LCD:
RTC battery is low or CMOS checksum is inconsistent. Press [F2] key to set Date/Time.
The battery for RTC is wearing. Set the date and time in BIOS setup with the following steps:
1.Press [F1] key. BIOS setup will boot up.
2.Press [F2] to set the date in [System Date].
3.Press [F2] to set the time in [System Time].
User’s Manual |