Operating Basics
Connecting the LAN cable
3.Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
Disconnecting the LAN cable
To disconnect the LAN cable, follow the steps below.
1.Pinch the lever on the connector in the computer's LAN jack and pull out the connector.
2.Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
Wireless LAN
The wireless LAN is compatible with other LAN systems that comply with the 802.11b/g or 802.11a/b/g wireless LAN standard.
It supports the following:
■Automatic Transmit Rate Select mechanism in the transmit range of 54, 11, 5.5, 2 and 1 Mbit/s.
■Advanced Encryption Standard (AES) data encryption, based on 128bit encryption algorithm.
Wake-up on LAN does not function on a Wireless LAN.
■Frequency Channel Selection (5GHz and 2.4 GHz)
■Roaming over multiple channels
■Card Power Management
■Wired Equivalent Privacy (WEP) data encryption.
Wireless LAN Disclaimer:
The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
User’s Manual |
