Thank you for purchasing the V200 Series PLC (Programmable Logic Controller) product from Toshiba International Corp. V200 Series products are versatile PLCs which are configured with Microsoft Windows based software.
Manual’s Purpose and Scope
This manual provides information on how to safely install, operate, and maintain your TIC V200 Series PLC. This manual includes a section of general safety instructions that describes the warning labels and symbols that are used throughout the manual. Read the manual completely before installing, operating, or performing maintenance on this equipment.
This manual and the accompanying drawings should be considered a permanent part of the equipment and should be readily available for reference and review. Dimensions shown in the manual are in metric and/or the English equivalent.
Toshiba International Corporation reserves the right, without prior notice, to update information, make product changes, or to discontinue any product or service identified in this publication.
TOSHIBA is a registered trademark of the Toshiba Corporation. All other product or trade references appearing in this manual are registered trademarks of their respective owners.
Toshiba International Corporation (TIC) shall not be liable for technical or editorial omissions or mistakes in this manual, nor shall it be liable for incidental or consequential damages resulting from the use of information contained in this manual.
This manual is copyrighted. No part of this manual may be photocopied or reproduced in any form without the prior written consent of Toshiba International Corporation.
Toshiba International Corporation.
All rights reserved.
Printed in the U.S.A.
II
