Toshiba V200 user manual COM1, COM3

Default System Tags

Note: Please do not attempt to modify read only system tags in the ladder. This could affect the functionality of the product.

System Registers / Coils:

Register / Coil	Tag Name	Read / Write	Description
SW0003_14	COM1 Status	Read Only	0 = Communication Error; 1= Communicating
			with PLC
SW0003_15	COM2 Status	Read Only	0 = Communication Error; 1= Communicating
			with PLC
S0000	Carry Bit	Read/Write	Overflow indication in math operations of ladder
			and also used in rotate with carry instruction.
SW0010	RTC Day of Month	Read only	RTC day in integer format
SW0011	RTC Month	Read only	RTC month in integer format
SW0012	RTC Year	Read only	RTC year in integer format
SW0013	RTC Hour	Read only	RTC hour in integer format
SW0014	RTC Min	Read only	RTC minute in integer format
SW0015	RTC Sec	Read only	RTC sec in integer format
SW0016	RTC Day of Week	Read only	RTC day of week in integer format
SW0017	Scan time register	Read only	Value is in multiple of 0.1 mSec. This includes
			execution time for reading inputs, executing
			tasks, executing ladder, update outputs, etc.
			(Refer flow chart)
S0019	Invalid RTC date entry	Read only	0=valid date	1= Invalid date
SW0018	COM1 failed node reconnect	Read/write	Shows time in sec recover the communication
	time (Sec)		with failed nodes for port1.the default value is
			60Sec
SW0019	COM2 failed node reconnect	Read/write	Shows time in sec recover the communication
	time (Sec)		with failed nodes for port1.the default value is
			60Sec
SW022	COM3 failed node reconnect	Read/write	Shows time in sec recover the communication
	time (Sec)		with failed nodes for port3.the default value is
			60Sec
S0021	COM1 failed node reconnect	Read/write	If this bit is set communication with the failed
	control		nodes is detected after scan time SW0018 for
			port1.By default : ON
S0022	COM2 failed node reconnect	Read/write	If this bit is set communication with the failed
	control		nodes is detected after scan time SW0019 for
			port2.By default : ON
S0023	COM3 failed node reconnect	Read/write	If this bit is set communication with the failed
	control		nodes is detected after scan time SW0022 for
			port3.By default : ON
SW64-SW65	Node Status Registers for	Read only	Shows the status of the node, whether node is
	COM1		present or not. Total 2 word Register are mapped
			for 32 nodes.
SW80-SW81	Node Status Registers for	Read only	Shows the status of the node, whether node is
			COM2 present or not. Total 2 word Register are
			mapped for 32 nodes.
SW96-SW111	Node Status Registers for	Read only	Shows the status of the node, whether node is
		COM3	present or not. Total 16 word Register are
			mapped for 256 nodes.
			(Not applicable for non-Ethernet models)

Page 79