Page 54
Carefully unpack the V200 PLC. Please read all the instructions and cautions that appear on the shipping container.
Check that the container includes the Mounting DIN rail slider, locking connector, and a silica gel bag. The silica gel
bag is enclosed to absorb the moisture in the packing. TIC Houston will not accept responsibility for shortages
against the packing list unless notified within 30 days. The unit and its accessories were inspected and tested by
TIC Houston before shipment. All equipment should be in good working order. Examine the product carefully and
notify the carrier immediately if any shipping damage is evident. You are responsible for claim negotiations with the
carrier. Save the shipping container and packing material in case the equipment needs to be stored, returned to TIC
Houston, or transported for any reason.
It is recommanded NOT to remove the enclosure of the V200 PLC. When any part of the enclosure is removed, the
circuitry inside is exposed to possible damage by electrostatic discharge during handling. Minimize the possibility of
electrostatic discharge by:
• Dissipating static electricity of body prior to handling the V200 PLC.
• Handling the V200 PLC at a static-free grounded workstation.
• Connecting the frame ground connector of the V200 to a clean earth ground.
• Placing the V200 in an antistatic bag during transport.
2.3 CE Compliance
V200 products have been tested to confirm to European CE requirements per Council Directive. The European Union
created these requirements to ensure conformity among products traded in those countries. These products are
designed to withstand electrical noise in harsh industrial environment. They also confirm to requirements that limit
electrical emission. However this does not guarantee the products will be totally immune from possible mal function
in cases where severe electrical noise occurs. Therefore, we strongly recommend that you follow the guidelines
outlined for proper wiring and grounding to ensure the proper operation.
V200 series models are designed to operate at temperature range defined in the specification. It is intended
primarily for indoor installations and may not be suitable for certain outdoor applications. Avoid installing the V200 in
environments with severe mechanical vibration or shocks. Do not install the V200 in enclosures with rapid
temperature variations or high humidity. Either will cause condensation of water inside the device and eventual
damage to the V200 PLC.