DRUM INSTALLATION NOTE: Be sure to position the drum with the clip toward the rear when you reinstall it.
NOTE: There are two rollers on the front panel and two on the rear panel, as shown below.
Front Panel (inside) | Rear Panel (inside) |
Front | Position Clip |
| Towards Rear |
Front Rollers | Rear Rollers |
12. To remove a roller:
a) Pry the sides of the triangular ring out of the groove in the roller support with a small screwdriver.
Triangular Ring (Partially Removed)
Install Drum 
b) Slide the roller off the roller support.
Roller Support
