123245 678925

You may follow the progress of your dryer with the drying status indicator lights.

1￿￿57￿8

When a cycle is first turned on, the Sensing light illuminates until a wet item is detected.

In an Automatic Cycle, if a wet item has not been detected within 10 minutes, the Sensing light will turn off and the dryer will shut down.

In a Manual Cycle, if a wet item is not detected after

10 minutes the Wet light turns on and the selected cycle continues.

￿￿2

The Wet light will turn on when a wet item has been detected in the dryer. The Wet light will remain on until:

The damp dry point is reached in an Automatic Cycle.

The dryer enters the cool down period in a Manual Cycle.

￿3￿￿

The Damp light indicates that the load has reached the damp dry

12345level.

The Damp light is not used with Manual Cycles.

￿￿￿￿￿￿￿￿￿

The Cool Down light illuminates during the cool down part of the cycle. Laundry is cooling down for ease in handling.

￿￿￿￿￿￿￿￿￿￿￿￿2￿

The Cycle Complete light illuminates when a drying cycle is finished. If the Extra Care feature has been selected, the Extra Care feature indicator light will also be on.

The Cycle Complete light turns off 1 hour after the end of a drying cycle (including the Extra Care cycle of 2 hours), when Off is pressed, or when the door is opened.

￿￿2￿3￿￿3￿￿￿￿￿324￿￿

The Extra Care feature light illuminates when this option is selected. This indicator stays on with the Cycle Complete light.

￿￿￿2￿￿￿￿6￿￿￿￿￿

The Control Locked light illuminates when this option is enabled.

￿￿￿7￿32￿￿￿￿78925

Other indicator lights on the control panel show Cycle, Temperature and Cycle End Signal settings selected.

The time display will indicate the estimated or actual time remaining in a cycle.

￿￿￿￿￿5

Select the drying cycle that matches the type of load you are drying. See Automatic preset or Manual preset cycle settings charts.

1234563789￿746￿87￿

￿ !"#￿!￿￿￿$￿6￿1

Automatic Cycles allow you to match the cycle to the load you are drying. See the following Automatic preset cycle settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.

%￿3&￿￿￿42￿

Use this cycle to get High heat for heavyweight mixed loads, cotton towels or jeans.

'￿￿￿3￿

Use this cycle to get Medium heat for drying sturdy fabrics such as work clothes and sheets.

￿3543￿

Use this cycle to get Medium heat for drying no-iron fabrics such as sport shirts, casual business clothes and permanent press blends.

￿￿￿7￿32￿

Use this cycle to get Low heat for drying synthetic fabrics, washable knit fabrics and no-iron finishes.

14￿￿￿￿￿￿￿7￿32￿

Use this cycle to get Extra-Low heat to gently dry items such as lingerie, exercise wear or sheer curtains.

3-3

Page 27
Image 27
Whirlpool MED / GD 9700S, MED / GD 9600S manual 1234563789