REMOVING THE BURNER ASSEMBLY,

FLAME SENSOR, AND HIGH-LIMIT THERMOSTAT

(GAS DRYERS ONLY)

WARNING

Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug dryer or disconnect power.

2.Turn off gas supply to dryer.

3.Remove the two hex-head screws from the bottom flange of the toe panel. Pull the panel out at the bottom, pull down, and remove the panel.

Burner Assembly

4.To remove the burner assembly:

a)Remove the two hex-head screws from the burner support bracket, and pull the bracket away from the burner assembly.

Screws

 

 

 

Burner Support

 

 

 

Toe Panel

Toe Panel Screws

4-18

Page 47
Image 47
Whirlpool MED / GD 9700S, MED / GD 9600S manual To remove the burner assembly