REMOVING THE MOISTURE SENSOR

WARNING

Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug dryer or disconnect power.

2.Turn off gas supply to dryer.

3.Open the dryer door and remove the lint filter screen.

4.Remove the two front screws from the

outlet grille.

Lint Filter

5.Remove the three inside screws from the outlet grille.

Screw

Outlet Grille

Screw

Moisture Sensor

Screw

6.Pull the moisture sensor away from the dryer and disconnect the black and yel- low-red wires from the moisture sensor strips.

Black Wire

Yellow-Red Wire

Outlet Grille Screws

4-17

Page 46
Image 46
Whirlpool MED / GD 9600S, MED / GD 9700S manual Removing the Moisture Sensor