REMOVING THE DOOR SWITCH
WARNING
Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug dryer or disconnect power.
2.Turn off gas supply to dryer.
3.Pull the dryer away from the wall and remove the top cover (see steps 4 and 5 on page
4.Remove the console (see page
5.Push the wire holder out of the chassis hole.
6.Press a screwdriver blade against the locking arms on each side of the door switch, (from behind the cutout), and push the switch and wiring harness out.
Screwdriver
Removal
Wire Holder
Door Switch
Brown Wire
(N.C.)
Blue Wire
White Wire 
(N.O.) (COM)
