Xerox 4700 manual To Scan Using Configure Before Scan

Configure Before Scan

You can set up the scanner so that, when you press a button or click it on the Button Panel, a different scanning interface opens before the scanning starts. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the One Touch Properties window for that button.

1.Open the One Touch Properties window.

2.Select the scan configuration Configure Before Scan.

3.Click OK or Apply on the One Touch Properties window.

To Scan Using Configure Before Scan

1.Click the button you set up to use Configure Before Scan.

2.The TWAIN Interface opens.

3.Choose your scan settings, such as the Picture Type of Color, Grayscale or Black & White, Resolution in DPI, and Page Size.

4.Click the Scan button on the TWAIN Interface.

5.The item is scanned. When finished, click the Done button and the image will be sent to the Destination Application specified in the One Touch Properties window.

62Xerox® DocuMate® 4700 User’s Guide