Xerox 4700 Scanner Configuration, Reordering the Modules, Color correction, Power adjustments

There are some features in the scanner interface that are disabled until a module is installed that contains those options. When the module is installed, the features will enable in the scanner interface for you to use them.

Reordering the Modules

Select a module in the list and click the up or down arrow to change the order of the module in the list. Changing the order of the modules changes the order in which the image processing options are used. For example, if there are two modules installed and both modules include an automatic image rotation option, the first module's rotate option is used and the rotate setting in the second module is ignored so that the image is not rotated twice.

Scanner Configuration

The scanner configuration tab shows the hardware information for your scanner.

When you connect another scanner to the Xerox DocuMate 4700 scanner the Driver Configuration section will have two scanner specific tabs. You will need to refer to the scanner’s user guide, for the second scanner, for instructions on modifying any of the scanner specific options in this section.

Color correction:

Select the optimization style for color correction.

•"Printer" will optimize the image for duplicating on a printer.

•"Monitor" will optimize the image for displaying on a monitor.

Images optimized for a monitor, when printed, will not match the original scanned item.

Select Perform Color Correction on the Color Processing tab in the Image Enhancements section to enable this option.

Power adjustments:

•Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can adjust the amount of time you want the scanner to wait before it goes into low power.

Click the green enter button to save any changes in the Sleep mode field. Click the red reset button to reset to the default timeout value.

•Power off—input the number of minutes you want the scanner to wait before it turns itself off. Click the green enter button to save any changes in the power off field.

Click the red reset button to reset to the default timeout value.

Scanner maintenance:

•Counters—click the reset button next to the counter you want to set back to 0.

168Xerox® DocuMate® 4700 User’s Guide