Xerox 4700 manual Power Settings, Counters, Color correction

•LLD version—the scanner’s base driver version. This is not the One Touch software revision, TWAIN or WIA driver versions.

•Driver version—this is the version of the scanner’s TWAIN driver.

Power Settings

•Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can adjust the amount of time you want the scanner to wait before it goes into low power.

Click the green enter button to save any changes in the Sleep mode field. Click the red reset button to reset to the default timeout value.

•Power off—input the number of minutes you want the scanner to wait before it turns itself off. Click the green enter button to save any changes in the power off field.

Click the red reset button to reset to the default timeout value.

Counters

•Counters—click the reset button next to the counter you want to set back to 0.

Color correction

Select the optimization style for color correction.

•"Printer" will optimize the image for duplicating on a printer.

•"Monitor" will optimize the image for displaying on a monitor.

Images optimized for a monitor, when printed, will not match the original scanned item.

Select Perform Color Correction on the Color Processing tab in the Image Enhancements section to enable this option.

170Xerox® DocuMate® 4700 User’s Guide